Roof Leak Repair, NJ - Licensed Contractors

Why Roof Leaks Happen

With all the extreme weather we've seen in recent years, it's no surprise that shingle damage is one of the most common causes of leaky roofs. So how do roofs get damaged? Many factors can damage shingles, such as:

• Weather - loosened and broken off caused by high winds or constant freeze and thaw cycles.
• Impact damage - High activity use (roof-top patios, animals), hail damage, fallen trees or debris, etc.
• Poor installation - More susceptible to damage and leaks.

Now, you might be wondering what the most common causes of shingle damage are. Is it an improper roof installation? Is it weather-related?

The answer is both. While improper installation can undoubtedly lead to shingle damage, the reality is that the weather is the most common cause. 

Strong winds can rip shingles off, and hail can create holes in them. But frost and extreme heat can damage shingles the most. Of course, if you do your research and hire a professional roof leak repair contractor, you're much less likely to experience problems due to an improper installation. But even the best-installed roof can't always withstand the fury of Mother Nature.

The main ways that roofing materials can become damaged are from the expansion and contraction of the material, which eventually causes cracks. In addition, when shingles crack, water can seep in and freeze, causing even more damage. Another reason for damages is simply age - over time, the material will eventually break down and need to be replaced. Some roofing materials last longer than others, however.

Asphalt is among the cheapest roofing materials but has one of the shortest lifespans compared to its alternatives. In contrast, metal roofs last much longer but cost more than shingles. Slate roofs can sometimes last up to 100 years, but they are also the most expensive option. Thankfully, our roofing contractors can help you choose the best material for your needs.

So if you require roof leak repair in New Jersey, keep both the weather and installation quality in mind as you seek a reliable and reputable service provider. Heavenly Construction can get your roof back in tip-top shape with some thought and due diligence.

Leak Detection

Detecting the source of leaks is often challenging, especially if they are small. When conducting roof leak detection, our process is to look for water damage and stains on your property's ceilings, walls, and insulation. We will also check the attic for water damage and wet spots.

Once we have detected the leak, we will quickly repair it. Our team is experienced in all types of roof leaks and knows how to fix them promptly and efficiently. We always use the best materials and products on the market when repairing roofs, so you can be sure your property is in good hands. Quality roofing is what we do best!

How To Spot A Roof Leak

Once you've determined that you do have a leak, you need to find its source. It may be difficult, as water can travel along the inside of your roof and create stains in different areas than the actual leak. Look for signs such as water stains on the ceiling, bubbling paint, rust around roofing nails, damp insulation, missing shingles, etc. 

If you've found the source of where water is seeping through, your next step is to minimize the damage as much as possible until a professional can fix it. One way to do this is to put a bucket under the leak to catch the water during downpours. If the leak is in the ceiling, you can also make a small hole with a screwdriver to funnel the water into the bucket. Again, this will help prevent further damage to your home until we repair the leak.

Roof Flashing Repair NJ

Roof flashing is a commonly overlooked area when it comes to roof repair. The reason is that flashing is often made of galvanized steel and is not as visible as other roof parts that are not as concealed. However, if your flashing is damaged, it can lead to small leaks or an entire roof replacement if the damage is beyond repair.

Here is a list of some indications that you may need chimney flashing repair:

• Water stains on the walls or ceilings near the chimney.
• Discoloration or rust on the metal flashing.
• Cracks in the metal flashing.
• Mortar falls away from the brick chimney.

If you notice any of these signs, please contact us immediately for chimney flashing repair. We will repair the flashing using high-quality materials so that it will be waterproof and durable.

Step Flashing

Step flashing is a flashing used to prevent water from leaking into the roof around a chimney. It is made out of metal and is installed between the duct and the roofing material. Without step flashing, water can easily leak into the roofing material and cause damage.

Our Process: A roof flashing process is something that is done in order to help prevent roof leaks. Flashing is a thin piece of metal or plastic that is used to seal the joints between different parts of the roof. It is important to have a good flashing process in order to keep your roof from leaking. Our step-by-step process for this is as follows:

1. Inspect the roof for any damage or leaks.
2. Clean and prepare the surface where the flashing will be installed.
3. Apply a coat of roofing cement to the surface.
4. Install the flashing and seal it into place with roofing cement.
5. Seal all seams and joints in the flashing.

How To Fix A Leak

The best course of action is to hire a roofing contractor. We can check the roof's overall structure and inspect other troubled areas that may become a potential source for future leaks. Sometimes a small leak is something that you can handle on your own. 

One common type of leak that is easy to fix is a nail leak. You will know it occurs when water seeps in through a nail hole. Applying a sealant to the area will prevent further water damage. 



We recommend using a silicone sealant for the best results. It may be possible to identify which nails are causing leaks during the winter by looking for frosted nails in the attic.

In other cases, additional sealant or caulk is needed around roof joints. However, caulk alone will not provide a long-term fix, and it is often necessary to replace old or damaged flashing around joints.

If you have a shingle roof, then it is also possible to replace damaged or missing shingles, but we recommend hiring a roofing contractor to do this as well. For owners of a flat roof, it will be more challenging to locate the source of a leak because of various factors like access to the top-level, knowledge of flat roofing material, and more. In this case, it is best to hire a professional to inspect and repair the rubber membrane that is currently installed.

We recommend checking for any rusty sections or nails if you have a metal roof. These can be repaired with a special primer and then painted over. If the rust is severe, you may need to replace the entire panel. 

You should also check the fasteners to ensure that they are too tight or loose. If you see any damage, you will need to replace the fastener.

For tiles, then you will need to make sure that they are not cracked or damaged. It would be best to examine the underlayment to ensure that it is intact. Any damages that you have determined will require a replacement of the underlayment. Again, we strongly recommend hiring a roofing contractor for your home or business building because performing any examinations will require being on the most elevated level of your property and can be dangerous if not cautious doing so.

The safest method of repairing a leak is to check the drains and gutters to ensure they are not blocked. Leaves and debris can easily block these, so it is essential to keep them clear. You should also check the flashings and sealants around the roof to make sure that they are still intact. If you see any cracks or damage, you need to repair or replace them.

If you are not comfortable working on the roof or are unsure of how to make the repairs, it is best to call a roofing contractor.

Residential Roof Damage From Leaks

Water leaks can cause extensive damage to a home if not repaired quickly. Some of the most common types of wear we see on New Jersey roofs include:



• Warped or buckled roof decks
• Damaged shingles, tiles, or slate
• Deteriorated flashing around chimneys and roof vents
• Pooled water on the roof surface
• Ice dams on the roof edge
• Water stains on ceilings or walls
• Peeling paint
• Clogged gutters
• Water leaking into the home during rainstorms

These damages can lead to more severe problems, such as roof collapse. Therefore, if you are experiencing any of the following issues above, our roof experts advise you to call us immediately for a roof inspection.

Commercial Roof Damage From Leaks

Leaky roofs can cause significant damage to commercial roofs, which often leads to substantial financial losses. The following is a list of some of the most prevalent sorts of damage:

• Water infiltration
• Damaged insulation
• Stained ceilings and walls
• Mold and mildew growth
• Structural damage

Rotted Wood

If you have a roof leak, there is a good chance you will also have rotted wood. The following are some signs of rotted wood:

• Soft, spongy feel
• Discoloration (usually black or green)
• Decay odor
• The presence of insects or fungi

Rotted wood can quickly spread and cause more damage to your roof. If you have any of the signs of rotted wood, please get in touch with us immediately for roof repair.

When Should You Call A Professional To Fix A Leak?

Most homeowners know that repairing a roof leak can be a daunting task. It often requires getting up on the roof, which can be dangerous if you don't have the proper safety equipment. If you're not comfortable performing any of these repairs yourself, it's best to call a professional. Doing so will save you money long-term and ensure that the job is done correctly and safely.

Professional roofers should guarantee their work and the warranties of the roofing materials. For example, most materials for leak repairs have a disclaimer that states that the manufacturer's warranties are void if a professional roofer does not install them. Unfortunately, if you attempt to repair the roof yourself, you will not be covered if something goes wrong. As a result, you may end up causing more damage and having to pay even more for repairs.

Furthermore, if any significant damages are witnessed upon inspection, a simple shingle replacement or flashing repair won't solve the core issue. The longer a property owner waits to fix what they suspect is a roof leak, the higher the chances of paying a significant amount for removing the sections of the roofing deck or an entire system itself.

At Heavenly Construction, we guarantee a quality assurance warranty for every job we do. So, if something goes wrong with the repairs we provided, you can expect our contractors to come back and fix the problem without paying any additional charges. We promise to help save you money and future headaches in the long run.

Types Of Residential and Commercial Roofs We Repair

Heavenly Construction is a family-owned and operated full-service roofing repair NJ company that provides all types of properties' repair and replacement services. We work on the following:



• Asphalt shingles
• Clay tiles
• Concrete tiles
• Copper roofs
• Faux roofs
• Flat roofs
• Metal roofs
• Slate roofs

If you are unsure what type of roof you have, our roofing contractors can help you determine it. In addition, we provide free roof inspections and estimates, so don't hesitate to contact us today to receive a free estimate!

Areas We Serve

• Bergen County
• Essex County
• Hudson County
• Middlesex County
• Monmouth County
• Morris County
• Ocean County
• Sussex County
• Passaic County
• Union County